From: Klaus Eckhoff (Klaus.Eckhoff_at_Materna.DE)
Date: Fri May 20 1994 - 03:58:18 EDT
Hi all,
after waiting about two months I received the internal SCSI kit (66G3513)
yesterday. It comes with two trays for 25.4 mm and 19.9 mm disks and
the needed SCSI cable.
I used a MAXTOR MTX-540SL drive (540MB) and after playing around
with terminators I succeeded in running it inside tho dock. I noticed
that you have to jumper the drive for "motor start with power",
because the SCSI adapter in the dock doesn't send a start command to
the drive. After reformatting the drive (was previously installed in an
RS/6000) with the SCSI diagnostic comming with the dock, I was able
to use it both under DOS and SCO without any problem.
--- Klaus Eckhoff, Dr. Materna GmbH, D-44141 Dortmund, Germany, ke_at_Materna.DE
This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:52:21 EST