Graphics card in Dock II?

New Message Reply Date view Thread view Subject view Author view Attachment view

From: Ronald Sakaguchi (rls_at_mthood.ohsu.edu)
Date: Wed Aug 02 1995 - 19:18:57 EDT

1. The external CRT display from my TP 755CD on an IBM 17P monitor seems a
little unstable with some shimmer. Have others found this also?

2. Is it possible to put a high res graphics card into the Dock II to drive the
monitor? I presume that would give a more stable image.

3. I've tried to load WordPerfect 6.1 onto the 755CD, but the system hangs
after installation of the setup disk. Any concurrences/suggestions?

4. I've also tried to run MacLink Plus PC Connect between the 755CD and a
PowerMac 7100. They just won't talk to each other. The cable is good and I've
been successful in connecting the 7100 to other PCs. The problem seems to be
with the 755CD.

5. When I try to print out of the Dock II thru the parallel port, I get a
printer error message. When the same doc is printed directly out of the 755CD's
parallel port, everything is OK. Any suggestions?

Thanks for your help. Sorry for all of the questions!

rls 

-- 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Ronald L. Sakaguchi, DDS, MS, PhD  Dept of Biomaterials & Biomechanics
Associate Professor 		   Oregon Health Sciences University
voice: (503) 494-8692		   611 SW Campus Drive, SD-503
fax: (503) 494-8260		   Portland, OR  97201-3097
rls_at_mthood.ohsu.edu
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

New Message Reply Date view Thread view Subject view Author view Attachment view

This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:52:42 EST