From: Wilson Yip (wyip_at_nicotra.com.sg)
Date: Fri Feb 09 1996 - 10:03:59 EST
I hope somebody who is using OS/2 Warp, MWave 2.0 modem and
Vmodem can help me with this problem.
I was previously using a 750C with a Megahertz modem at Com 2 and
Vmodem at Com 4. Now that I have switched over to a 755CE using
the MWave 2.0 modem, my comms program TE/2 wont load after
loading Vmodem but gives the message:
"Cannot open ComPort 4"
Since Vmodem loads fine at Com 4, I dont know what is the
problem.
My Sio.Sys driver is loaded in my Config.Sys as follows:
DEVICE=D:\COMM\SIO.SYS (COM1) (COM2,2F8,IRQ3,,F)
(COM4,INTERNET,NONE)
Any help would be appreciated.
This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:52:56 EST