From: Michael Verne/VENTANA (Michael_Verne/VENTANA.ITP_at_lgate.vmedia.com)
Date: Fri Aug 09 1996 - 07:56:38 EDT
"... DEVICE=C:\DOS\EMM386.EXE NOEMS I=B000-B7FF X=CC00-CFFF
DEVICEHIGH=C:\THINKPAD\IBMDSS01.SYS
DEVICEHIGH=C:\THINKPAD\IBMDOSCS.SYS
DEVICEHIGH=C:\THINKPAD\DICRMU01.SYS /MA=CC00-CFFF /SH=1
DEVICEHIGH=C:\THINKPAD\$ICPMDOS.SYS
DEVICEHIGH=C:\DOS\POWER.EXE
DEVICEHIGH=C:\THINKPAD\AUTODRV.SYS C:\THINKPAD\AUTODRV.INI
rem UN'REM if using pcmcia disk drives b/b
rem DEVICEHIGH=C:\THINKPAD\DISKDRV.SYS..."
~~~~~
i don't know if this applies to the megahertz, but i've found that the xircom
drivers won't load in the autoexec if the resource map utility and autodriver
are loaded. i'd try rem'ing out all these lines except emm386.exe,
ibmdss01.sys, and ibmdoscs.sys. of course, i had to make a menu out of the
config.sys, so the other drivers could load when i wasn't on the network
because my usr sportster required them.
Michael J. Verne
Systems Administrator, Ventana Communications Group
michael_verne_at_vmedia.com
http://www.vmedia.com/michaelv/
-------------------------------
If you board the wrong train, it's no use running along the corridor
in the other direction. --Dietrich Bonhoeffer
This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:53:13 EST