From: Gary Henry (HenryG_at_mail.dec.com)
Date: Thu Sep 05 1996 - 13:18:22 EDT
I do ot remember seeing the original thread but I know that there is a
KNOWN problem with 760's (E and ED) with locking up when you come out
of suspend or hibernation mode if you have a Modem in the PCMCIA slot
or you do not use the IBM PCIC driver.
First thing to try is to make sure that the IBM driver is installed
(check device manager in system properties). If not you need to
change the driver to the IBM one.
If the IBM driver is installed you will need to remember to remove the
MODEM from the PCMCIA slot BEFORE you go into suspend.
I have an open call with IBM on this and I hope that a fix is
forthcoming.
I hope this helps!!!
Gary
Microsoft ClubWin
----------
From: Steve Hultquist[SMTP:ssh_at_wwsi.com]
Sent: Wednesday, September 04, 1996 10:34 PM
To: Mark M. Ingerman
Cc: thinkpad_at_cs.utk.edu
Subject: Re: Win95 Suspend lockup
>>>>> "Mark" == Mark M Ingerman <ingerman_at_chelsea.ios.com> writes:
Mark> I have been having a problem with my 755cx and Win95. Every
once and a
Mark> while, when I am doing some type of long process, the computer
goes into
Mark> suspend mode and then locks up. This only seems to be a
problem if the
Mark> process I am running is a demeon type of process.
How are your power options set? This is pretty weird; I never had
this happen
with mine. Are you running Win95 APM with current TP utilities?
Mark> It was locked to the point that I could not eject it from the
docking
Mark> station. I had to pull the plug on the docking station, lift
up the
Mark> keyboard, and pull the battery.
It's actually easier than that. If it's a Dock II, hit the catch
under the
pinhole on the left side, pull the slider lever, and take it out.
ssh
-- Steve Hultquist, Founder Engineering the future Worldwide Solutions, Inc. ...with you Boulder, Colorado, USA 303.581.0800 http://www.wwsi.com
This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:53:16 EST