From: Gerd Schrode (g.schrode_at_t-online.de)
Date: Tue Feb 03 1998 - 17:22:49 EST
Hallo all,
I have a Problem with my 365x Thinkpad to run X. All the configuration
is ok, but the Display shows undefined Characters if I stop X with -ctrl
alt bs-.
after break my Display on remote Server shows as follows
---------------------------------------------------------
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: PS/2, device: /dev/psaux, baudrate: 1200
(**) SVGA: Graphics device ID: "Trident TGUI9420DGi (generic)"
(**) SVGA: Monitor ID: "Primary Monitor"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi"
(--) SVGA: PCI: Trident TGUI 9320 rev 227, Memory @ 0x08000000,
0x08200000
(--) Trident chipset version: 0xa3 (Cyber9320)
(--) SVGA: Revision 3.
(--) SVGA: Using Trident programmable clocks
(--) SVGA: chipset: tgui9320lcd
(--) SVGA: videoram: 1024k
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 80.000 MHz
(--) SVGA: There is no mode definition named "800x600"
(--) SVGA: Removing mode "800x600" from list of valid modes.
(**) SVGA: Mode "640x480": mode clock = 25.180
(--) SVGA: There is no mode definition named "640x400"
(--) SVGA: Removing mode "640x400" from list of valid modes.
(--) SVGA: Virtual resolution set to 640x480
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: Using Linear Frame Buffer at 0x08000000, Size 1MB
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: No acceleration primitives defined.
xinit: connection to X server lost.
waiting for X server to shut down X connection to :0.0 broken (explicit
kill or server shutdown).
xterm: fatal IO error 2 (Broken pipe) or KillClient on X server ":0.0"
xterm: fatal IO error 2 (Broken pipe) or KillClient on X server ":0.0"
who can help
best regards ..... Gerd
This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:53:55 EST