Re: H45 Quick Drive

New Message Reply Date view Thread view Subject view Author view Attachment view

From: Paul Khoury (pkhoury_at_loop.com)
Date: Tue Oct 20 1998 - 19:36:41 EDT

>The manual for the H45 Quick drive states:
>The quick drive DOES NOT support DMA. If your Parallel Port is set to ECP
>mode, it must be changed in your CMOS setup.
>
>How would I access the CMOS and change the ECP?
>
Try either EPP or SPP. Try pressing F1 to go to Easy Setup on a cold boot (after turning
on the machine, no hibernation to resume to).

>Any thoughts (step by step) appreciated. Also has anyone on this list
>successfully used a H45 Quick drive on their laptop?
>
Other options might be a PCMCIA HD or a SCSI adapter, as these would be much faster
IMO. 

-- 
Paul Khoury |  <pkhoury_at_loop.com> | Sent from my K5-200
http://warped.cswnet.com/~pkhoury/index.html  |  http://pkhoury.dyn.ml.org (local machine)
Running OS/2 Warp 3/4, Mac OS 7.5.3, Sun Solaris 2.3, Linux 2.0.29,  Newton OS 1.05
ICQ#14582895

New Message Reply Date view Thread view Subject view Author view Attachment view

This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:54:27 EST