From: Mark Gardiner (100550.3170_at_compuserve.com)
Date: Mon Mar 01 1999 - 14:21:12 EST
RE: Copy of: Re: error codes - Full list here
Listed here are the W95 Error codes ...FYI
0 0x0000 The operation completed successfully.
1 0x0001 Incorrect function.
2 0x0002 The system cannot find the file specified.
3 0x0003 The system cannot find the path specified.
4 0x0004 The system cannot open the file.
5 0x0005 Access is denied.
6 0x0006 The handle is invalid.
7 0x0007 The storage control blocks were destroyed.
8 0x0008 Not enough storage is available to process this command.
9 0x0009 The storage control block address is invalid.
10 0x000A The environment is incorrect.
11 0x000B An attempt was made to load a program with an incorrect
format.
12 0x000C The access code is invalid.
13 0x000D The data is invalid.
14 0x000E Not enough storage is available to complete this operation.
15 0x000F The system cannot find the drive specified.
16 0x0010 The directory cannot be removed.
17 0x0011 The system cannot move the file to a different disk drive.
18 0x0012 There are no more files.
19 0x0013 The media is write protected.
20 0x0014 The system cannot find the device specified.
21 0x0015 The device is not ready.
22 0x0016 The device does not recognize the command.
23 0x0017 Data error (cyclic redundancy check)
24 0x0018 The program issued a command but the command length is
incorrect.
25 0x0019 The drive cannot locate a specific area or track on the
disk.
26 0x001A The specified disk or diskette cannot be accessed.
27 0x001B The drive cannot find the sector requested.
28 0x001C The printer is out of paper.
29 0x001D The system cannot write to the specified device.
30 0x001E The system cannot read from the specified device.
31 0x001F A device attached to the system is not functioning.
32 0x0020 The process cannot access the file because it is being
used by another process.
33 0x0021 The process cannot access the file because another process
has locked a portion of the file.
34 0x0022 The wrong diskette is in the drive. Insert %2 (Volume
Serial Number: %3) into drive %1.
36 0x0024 Too many files opened for sharing.
38 0x0026 Reached end of file.
39 0x0027 The disk is full.
50 0x0032 The network request is not supported.
51 0x0033 The remote computer is not available.
52 0x0034 A duplicate name exists on the network.
53 0x0035 The network path was not found.
54 0x0036 The network is busy.
55 0x0037 The specified network resource or device is no longer
available.
56 0x0038 The network BIOS command limit has been reached.
57 0x0039 A network adapter hardware error occurred.
58 0x003A The specified server cannot perform the requested
operation.
59 0x003B An unexpected network error occurred.
60 0x003C The remote adapter is not compatible.
61 0x003D The printer queue is full.
62 0x003E Space to store the file waiting to be printed is not
available on the server.
63 0x003F Your file waiting to be printed was deleted.
64 0x0040 The specified network name is no longer available.
65 0x0041 Network access is denied.
66 0x0042 The network resource type is not correct.
67 0x0043 The network name cannot be found.
68 0x0044 The name limit for the local computer network adapter card
was exceeded.
69 0x0045 The network BIOS session limit was exceeded.
70 0x0046 The remote server has been paused or is in the process of
being started.
71 0x0047 No more connections can be made to this remote computer at
this time because there are already as many connections as the computer
can accept.
72 0x0048 The specified printer or disk device has been paused.
80 0x0050 The file exists.
82 0x0052 The directory or file cannot be created.
83 0x0053 Fail on INT 24
84 0x0054 Storage to process this request is not available.
85 0x0055 The local device name is already in use.
86 0x0056 The specified network password is not correct.
87 0x0057 The parameter is incorrect.
88 0x0058 A write fault occurred on the network.
89 0x0059 The system cannot start another process at this time.
100 0x0064 Cannot create another system semaphore.
101 0x0065 The exclusive semaphore is owned by another process.
102 0x0066 The semaphore is set and cannot be closed.
103 0x0067 The semaphore cannot be set again.
104 0x0068 Cannot request exclusive semaphores at interrupt time.
105 0x0069 The previous ownership of this semaphore has ended.
106 0x006A Insert the diskette for drive %1.
107 0x006B Program stopped because alternate diskette was not
inserted.
108 0x006C The disk is in use or locked by another process.
109 0x006D The pipe has been ended.
110 0x006E The system cannot open the device or file specified.
111 0x006F The file name is too long.
112 0x0070 There is not enough space on the disk.
113 0x0071 No more internal file identifiers available.
114 0x0072 The target internal file identifier is incorrect.
117 0x0075 The IOCTL call made by the application program is not
correct.
118 0x0076 The verify-on-write switch parameter value is not correct.
119 0x0077 The system does not support the command requested.
120 0x0078 This function is only valid in Win32 mode.
121 0x0079 The semaphore timeout period has expired.
122 0x007A The data area passed to a system call is too small.
123 0x007B The filename, directory name, or volume label syntax is
incorrect.
124 0x007C The system call level is not correct.
125 0x007D The disk has no volume label.
126 0x007E The specified module could not be found.
127 0x007F The specified procedure could not be found.
128 0x0080 There are no child processes to wait for.
129 0x0081 The %1 application cannot be run in Win32 mode.
130 0x0082 Attempt to use a file handle to an open disk partition for
an operation other than raw disk I/O.
131 0x0083 An attempt was made to move the file pointer before the
beginning of the file.
132 0x0084 The file pointer cannot be set on the specified device or
file.
133 0x0085 A JOIN or SUBST command cannot be used for a drive that
contains previously joined drives.
134 0x0086 An attempt was made to use a JOIN or SUBST command on a
drive that has already been joined.
135 0x0087 An attempt was made to use a JOIN or SUBST command on a
drive that has already been substituted.
136 0x0088 The system tried to delete the JOIN of a drive that is not
joined.
137 0x0089 The system tried to delete the substitution of a drive
that is not substituted.
138 0x008A The system tried to join a drive to a directory on a
joined drive.
139 0x008B The system tried to substitute a drive to a directory on a
substituted drive.
140 0x008C The system tried to join a drive to a directory on a
substituted drive.
141 0x008D The system tried to SUBST a drive to a directory on a
joined drive.
142 0x008E The system cannot perform a JOIN or SUBST at this time.
143 0x008F The system cannot join or substitute a drive to or for a
directory on the same drive.
144 0x0090 The directory is not a subdirectory of the root directory.
145 0x0091 The directory is not empty.
146 0x0092 The path specified is being used in a substitute.
147 0x0093 Not enough resources are available to process this
command.
148 0x0094 The path specified cannot be used at this time.
149 0x0095 An attempt was made to join or substitute a drive for
which a directory on the drive is the target of a previous substitute.
150 0x0096 System trace information was not specified in your
CONFIG.SYS file, or tracing is disallowed.
151 0x0097 The number of specified semaphore events for DosMuxSemWait
is not correct.
152 0x0098 DosMuxSemWait did not execute; too many semaphores are
already set.
153 0x0099 The DosMuxSemWait list is not correct.
154 0x009A The volume label you entered exceeds the label character
limit of the target file system.
155 0x009B Cannot create another thread.
156 0x009C The recipient process has refused the signal.
157 0x009D The segment is already discarded and cannot be locked.
158 0x009E The segment is already unlocked.
159 0x009F The address for the thread ID is not correct.
160 0x00A0 The argument string passed to DosExecPgm is not correct.
161 0x00A1 The specified path is invalid.
162 0x00A2 A signal is already pending.
164 0x00A4 No more threads can be created in the system.
167 0x00A7 Unable to lock a region of a file.
170 0x00AA The requested resource is in use.
173 0x00AD A lock request was not outstanding for the supplied cancel
region.
174 0x00AE The file system does not support atomic changes to the lock
type.
180 0x00B4 The system detected a segment number that was not correct.
182 0x00B6 The operating system cannot run %1.
183 0x00B7 Cannot create a file when that file already exists.
186 0x00BA The flag passed is not correct.
187 0x00BB The specified system semaphore name was not found.
188 0x00BC The operating system cannot run %1.
189 0x00BD The operating system cannot run %1.
190 0x00BE The operating system cannot run %1.
191 0x00BF Cannot run %1 in Win32 mode.
192 0x00C0 The operating system cannot run %1.
193 0x00C1 %1 is not a valid Win32 application.
194 0x00C2 The operating system cannot run %1.
195 0x00C3 The operating system cannot run %1.
196 0x00C4 The operating system cannot run this application program.
197 0x00C5 The operating system is not presently configured to run
this application.
198 0x00C6 The operating system cannot run %1.
199 0x00C7 The operating system cannot run this application program.
200 0x00C8 The code segment cannot be greater than or equal to 64KB.
201 0x00C9 The operating system cannot run %1.
202 0x00CA The operating system cannot run %1.
203 0x00CB The system could not find the environment option that was
entered.
205 0x00CD No process in the command subtree has a signal handler.
206 0x00CE The filename or extension is too long.
207 0x00CF The ring 2 stack is in use.
208 0x00D0 The global filename characters, * or ?, are entered
incorrectly or too many global filename characters are specified.
209 0x00D1 The signal being posted is not correct.
210 0x00D2 The signal handler cannot be set.
212 0x00D4 The segment is locked and cannot be reallocated.
214 0x00D6 Too many dynamic link modules are attached to this program
or dynamic link module.
215 0x00D7 Can't nest calls to LoadModule.
230 0x00E6 The pipe state is invalid.
231 0x00E7 All pipe instances are busy.
232 0x00E8 The pipe is being closed.
233 0x00E9 No process is on the other end of the pipe.
234 0x00EA More data is available.
240 0x00F0 The session was cancelled.
254 0x00FE The specified extended attribute name was invalid.
255 0x00FF The extended attributes are inconsistent.
259 0x0103 No more data is available.
266 0x010A The Copy API cannot be used.
267 0x010B The directory name is invalid.
275 0x0113 The extended attributes did not fit in the buffer.
276 0x0114 The extended attribute file on the mounted file system is
corrupt.
277 0x0115 The extended attribute table file is full.
278 0x0116 The specified extended attribute handle is invalid.
282 0x011A The mounted file system does not support extended
attributes.
288 0x0120 Attempt to release mutex not owned by caller.
298 0x012A Too many posts were made to a semaphore.
299 0x012B Only part of a Read/WriteProcessMemory request was
completed.
317 0x013D The system cannot find message for message number 0x%1 in
message file for %2.
487 0x01E7 Attempt to access invalid address.
534 0x0216 Arithmetic result exceeded 32 bits.
535 0x0217 There is a process on other end of the pipe.
536 0x0218 Waiting for a process to open the other end of the pipe.
994 0x03E2 Access to the extended attribute was denied.
995 0x03E3 The I/O operation has been aborted because of either a
thread exit or an application request.
996 0x03E4 Overlapped I/O event is not in a signalled state.
997 0x03E5 Overlapped I/O operation is in progress.
998 0x03E6 Invalid access to memory location.
999 0x03E7 Error performing inpage operation.
1001 0x03E9 Recursion too deep, stack overflowed.
1002 0x03EA The window cannot act on the sent message.
1003 0x03EB Cannot complete this function.
1004 0x03EC Invalid flags.
1005 0x03ED The volume does not contain a recognized file system.
Please make sure that all required file system drivers are loaded and that
the volume is not corrupt.
1006 0x03EE The volume for a file has been externally altered such that
the opened file is no longer valid.
1007 0x03EF The requested operation cannot be performed in full-screen
mode.
1008 0x03F0 An attempt was made to reference a token that does not
exist.
1009 0x03F1 The configuration registry database is corrupt.
1010 0x03F2 The configuration registry key is invalid.
1011 0x03F3 The configuration registry key could not be opened.
1012 0x03F4 The configuration registry key could not be read.
1013 0x03F5 The configuration registry key could not be written.
1014 0x03F6 One of the files in the Registry database had to be
recovered by use of a log or alternate copy. The recovery was successful.
1015 0x03F7 The Registry is corrupt. The structure of one of the files
that contains Registry data is corrupt, or the system's image of the file
in memory is corrupt, or the file could not be recovered because the
alternate copy or log was absent or corrupt.
1016 0x03F8 An I/O operation initiated by the Registry failed
unrecoverably. The Registry could not read in, or write out, or flush, one
of the files that contain the system's image of the Registry.
1017 0x03F9 The system has attempted to load or restore a file into the
Registry, but the specified file is not in a Registry file format.
1018 0x03FA Illegal operation attempted on a Registry key which has
been marked for deletion.
1019 0x03FB System could not allocate the required space in a Registry
log.
1020 0x03FC Cannot create a symbolic link in a Registry key that
already has subkeys or values.
1021 0x03FD Cannot create a stable subkey under a volatile parent key.
1022 0x03FE A notify change request is being completed and the
information is not being returned in the caller's buffer. The caller now
needs to enumerate the files to find the changes.
1051 0x041B A stop control has been sent to a service which other
running services are dependent on.
1052 0x041C The requested control is not valid for this service
1053 0x041D The service did not respond to the start or control request
in a timely fashion.
1054 0x041E A thread could not be created for the service.
1055 0x041F The service database is locked.
1056 0x0420 An instance of the service is already running.
1057 0x0421 The account name is invalid or does not exist.
1058 0x0422 The specified service is disabled and cannot be started.
1059 0x0423 Circular service dependency was specified.
1060 0x0424 The specified service does not exist as an installed
service.
1061 0x0425 The service cannot accept control messages at this time.
1062 0x0426 The service has not been started.
1063 0x0427 The service process could not connect to the service
controller.
1064 0x0428 An exception occurred in the service when handling the
control request.
1065 0x0429 The database specified does not exist.
1066 0x042A The service has returned a service-specific error code.
1067 0x042B The process terminated unexpectedly.
1068 0x042C The dependency service or group failed to start.
1069 0x042D The service did not start due to a logon failure.
1070 0x042E After starting, the service hung in a start-pending state.
1071 0x042F The specified service database lock is invalid.
1072 0x0430 The specified service has been marked for deletion.
1073 0x0431 The specified service already exists.
1074 0x0432 The system is currently running with the last-known-good
configuration.
1075 0x0433 The dependency service does not exist or has been marked
for deletion.
1076 0x0434 The current boot has already been accepted for use as the
last-known-good control set.
1077 0x0435 No attempts to start the service have been made since the
last boot.
1078 0x0436 The name is already in use as either a service name or a
service display name.
1100 0x044C The physical end of the tape has been reached.
1101 0x044D A tape access reached a filemark.
1102 0x044E Beginning of tape or partition was encountered.
1103 0x044F A tape access reached the end of a set of files.
1104 0x0450 No more data is on the tape.
1105 0x0451 Tape could not be partitioned.
1106 0x0452 When accessing a new tape of a multivolume partition, the
current blocksize is incorrect.
1107 0x0453 Tape partition information could not be found when loading
a tape.
1108 0x0454 Unable to lock the media eject mechanism.
1109 0x0455 Unable to unload the media.
1110 0x0456 Media in drive may have changed.
1111 0x0457 The I/O bus was reset.
1112 0x0458 No media in drive.
1113 0x0459 No mapping for the Unicode character exists in the target
multi-byte code page.
1114 0x045A A dynamic link library (DLL) initialization routine failed.
1115 0x045B A system shutdown is in progress.
1116 0x045C Unable to abort the system shutdown because no shutdown was
in progress.
1117 0x045D The request could not be performed because of an I/O device
error.
1118 0x045E No serial device was successfully initialized. The serial
driver will unload.
1119 0x045F Unable to open a device that was sharing an interrupt
request (IRQ) with other devices. At least one other device that uses that
IRQ was already opened.
1120 0x0460 A serial I/O operation was completed by another write to
the serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
1121 0x0461 A serial I/O operation completed because the time-out
period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
1122 0x0462 No ID address mark was found on the floppy disk.
1123 0x0463 Mismatch between the floppy disk sector ID field and the
floppy disk controller track address.
1124 0x0464 The floppy disk controller reported an error that is not
recognized by the floppy disk driver.
1125 0x0465 The floppy disk controller returned inconsistent results in
its registers.
1126 0x0466 While accessing the hard disk, a recalibrate operation
failed, even after retries.
1127 0x0467 While accessing the hard disk, a disk operation failed even
after retries.
1128 0x0468 While accessing the hard disk, a disk controller reset was
needed, but even that failed.
1129 0x0469 Physical end of tape encountered.
1130 0x046A Not enough server storage is available to process this
command.
1131 0x046B A potential deadlock condition has been detected.
1132 0x046C The base address or the file offset specified does not have
the proper alignment.
1140 0x0474 An attempt to change the system power state was vetoed by
another application or driver.
1141 0x0475 The system BIOS failed an attempt to change the system
power state.
1150 0x047E The specified program requires a newer version of Windows.
1151 0x047F The specified program is not a Windows or MS-DOS program.
1152 0x0480 Cannot start more than one instance of the specified
program.
1153 0x0481 The specified program was written for an older version of
Windows.
1154 0x0482 One of the library files needed to run this application is
damaged.
1155 0x0483 No application is associated with the specified file for
this operation.
1156 0x0484 An error occurred in sending the command to the
application.
1157 0x0485 One of the library files needed to run this application
cannot be found.
1200 0x04B0 The specified device name is invalid.
1201 0x04B1 The device is not currently connected but it is a
remembered connection.
1202 0x04B2 An attempt was made to remember a device that had
previously been remembered.
1203 0x04B3 No network provider accepted the given network path.
1204 0x04B4 The specified network provider name is invalid.
1205 0x04B5 Unable to open the network connection profile.
1206 0x04B6 The network connection profile is corrupt.
1207 0x04B7 Cannot enumerate a non-container.
1208 0x04B8 An extended error has occurred.
1209 0x04B9 The format of the specified group name is invalid.
1210 0x04BA The format of the specified computer name is invalid.
1211 0x04BB The format of the specified event name is invalid.
1212 0x04BC The format of the specified domain name is invalid.
1213 0x04BD The format of the specified service name is invalid.
1214 0x04BE The format of the specified network name is invalid.
1215 0x04BF The format of the specified share name is invalid.
1216 0x04C0 The format of the specified password is invalid.
1217 0x04C1 The format of the specified message name is invalid.
1218 0x04C2 The format of the specified message destination is invalid.
1219 0x04C3 The credentials supplied conflict with an existing set of
credentials.
1220 0x04C4 An attempt was made to establish a session to a network
server, but there are already too many sessions established to that
server.
1221 0x04C5 The workgroup or domain name is already in use by another
computer on the network.
1222 0x04C6 The network is not present or not started.
1223 0x04C7 The operation was cancelled by the user.
1224 0x04C8 The requested operation cannot be performed on a file with
a user mapped section open.
1225 0x04C9 The remote system refused the network connection.
1226 0x04CA The network connection was gracefully closed.
1227 0x04CB The network transport endpoint already has an address
associated with it.
1228 0x04CC An address has not yet been associated with the network
endpoint.
1229 0x04CD An operation was attempted on a non-existent network
connection.
1230 0x04CE An invalid operation was attempted on an active network
connection.
1231 0x04CF The remote network is not reachable by the transport.
1232 0x04D0 The remote system is not reachable by the transport.
1233 0x04D1 The remote system does not support the transport protocol.
1234 0x04D2 No service is operating at the destination network endpoint
on the remote system.
1235 0x04D3 The request was aborted.
1236 0x04D4 The network connection was aborted by the local system.
1237 0x04D5 The operation could not be completed. A retry should be
performed.
1238 0x04D6 A connection to the server could not be made because the
limit on the number of concurrent connections for this account has been
reached.
1239 0x04D7 Attempting to login during an unauthorized time of day for
this account.
1240 0x04D8 The account is not authorized to login from this station.
1241 0x04D9 The network address could not be used for the operation
requested.
1242 0x04DA The service is already registered.
1243 0x04DB The specified service does not exist.
1244 0x04DC The operation being requested was not performed because the
user has not been authenticated.
1245 0x04DD The operation being requested was not performed because the
user has not logged on to the network. The specified service does not
exist.
1246 0x04DE Return that wants caller to continue with work in progress.
1247 0x04DF An attempt was made to perform an initialization operation
when initialization has already been completed.
1248 0x04E0 No more local devices.
1300 0x0514 Not all privileges referenced are assigned to the caller.
1301 0x0515 Some mapping between account names and security IDs was not
done.
1302 0x0516 No system quota limits are specifically set for this
account.
1303 0x0517 No encryption key is available. A well-known encryption
key was returned.
1304 0x0518 The NT password is too complex to be converted to a LAN
Manager password. The LAN Manager password returned is a NULL string.
1305 0x0519 The revision level is unknown.
1306 0x051A Indicates two revision levels are incompatible.
1307 0x051B This security ID may not be assigned as the owner of this
object.
1308 0x051C This security ID may not be assigned as the primary group
of an object.
1309 0x051D An attempt has been made to operate on an impersonation
token by a thread that is not currently impersonating a client.
1310 0x051E The group may not be disabled.
1311 0x051F T
here are currently no logon servers available to service the logon
request.
1312 0x0520 A specified logon session does not exist. It may already
have been terminated.
1313 0x0521 A specified privilege does not exist.
1314 0x0522 A required privilege is not held by the client.
1315 0x0523 The name provided is not a properly formed account name.
1316 0x0524 The specified user already exists.
1317 0x0525 The specified user does not exist.
1318 0x0526 The specified group already exists.
1319 0x0527 The specified group does not exist.
1320 0x0528 Either the specified user account is already a member of
the specified group, or the specified group cannot be deleted because it
contains a member.
1321 0x0529 The specified user account is not a member of the specified
group account.
1322 0x052A The last remaining administration account cannot be
disabled or deleted.
1323 0x052B Unable to update the password. The value provided as the
current password is incorrect.
1324 0x052C Unable to update the password. The value provided for the
new password contains values that are not allowed in passwords.
1325 0x052D Unable to update the password because a password update
rule has been violated.
1326 0x052E Logon failure: unknown user name or bad password.
1327 0x052F Logon failure: user account restriction.
1328 0x0530 Logon failure: account logon time restriction violation.
1329 0x0531 Logon failure: user not allowed to log on to this computer.
1330 0x0532 Logon failure: the specified account password has expired.
1331 0x0533 Logon failure: account currently disabled.
1332 0x0534 No mapping between account names and security IDs was done.
1333 0x0535 Too many local user identifiers (LUIDs) were requested at
one time.
1334 0x0536 No more local user identifiers (LUIDs) are available.
1335 0x0537 The subauthority part of a security ID is invalid for this
particular use.
1336 0x0538 The access control list (ACL) structure is invalid.
1337 0x0539 The security ID structure is invalid.
1338 0x053A The security descriptor structure is invalid.
1340 0x053C The inherited access control list (ACL) or access control
entry (ACE) could not be built.
1341 0x053D The server is currently disabled.
1342 0x053E The server is currently enabled.
1343 0x053F The value provided was an invalid value for an identifier
authority.
1344 0x0540 No more memory is available for security information
updates.
1345 0x0541 The specified attributes are invalid, or incompatible with
the attributes for the group as a whole.
1346 0x0542 Either a required impersonation level was not provided, or
the provided impersonation level is invalid.
1347 0x0543 Cannot open an anonymous level security token.
1348 0x0544 The validation information class requested was invalid.
1349 0x0545 The type of the token is inappropriate for its attempted
use.
1350 0x0546 Unable to perform a security operation on an object which
has no associated security.
1351 0x0547 Indicates a Windows NT Server could not be contacted or
that objects within the domain are protected such that necessary
information could not be retrieved.
1352 0x0548 The security account manager (SAM) or local security
authority (LSA) server was in the wrong state to perform the security
operation.
1353 0x0549 The domain was in the wrong state to perform the security
operation.
1354 0x054A This operation is only allowed for the Primary Domain
Controller of the domain.
1355 0x054B The specified domain did not exist.
1356 0x054C The specified domain already exists.
1357 0x054D An attempt was made to exceed the limit on the number of
domains per server.
1358 0x054E Unable to complete the requested operation because of
either a catastrophic media failure or a data structure corruption on the
disk.
1359 0x054F The security account database contains an internal
inconsistency.
1360 0x0550 Generic access types were contained in an access mask which
should already be mapped to non-generic types.
1361 0x0551 A security descriptor is not in the right format (absolute
or self-relative).
1362 0x0552 The requested action is restricted for use by logon
processes only. The calling process has not registered as a logon
process.
1363 0x0553 Cannot start a new logon session with an ID that is already
in use.
1364 0x0554 A specified authentication package is unknown.
1365 0x0555 The logon session is not in a state that is consistent with
the requested operation.
1366 0x0556 The logon session ID is already in use.
1367 0x0557 A logon request contained an invalid logon type value.
1368 0x0558 Unable to impersonate via a named pipe until data has been
read from that pipe.
1369 0x0559 The transaction state of a Registry subtree is incompatible
with the requested operation.
1370 0x055A An internal security database corruption has been
encountered.
1371 0x055B Cannot perform this operation on built-in accounts.
1372 0x055C Cannot perform this operation on this built-in special
group.
1373 0x055D Cannot perform this operation on this built-in special
user.
1374 0x055E The user cannot be removed from a group because the group
is currently the user's primary group.
1375 0x055F The token is already in use as a primary token.
1376 0x0560 The specified local group does not exist.
1377 0x0561 The specified account name is not a member of the local
group.
1378 0x0562 The specified account name is already a member of the local
group.
1379 0x0563 The specified local group already exists.
1380 0x0564 Logon failure: the user has not been granted the requested
logon type at this computer.
1381 0x0565 The maximum number of secrets that may be stored in a
single system has been exceeded.
1382 0x0566 The length of a secret exceeds the maximum length allowed.
1383 0x0567 The local security authority database contains an internal
inconsistency.
1384 0x0568 During a logon attempt, the user's security context
accumulated too many security IDs.
1385 0x0569 Logon failure: the user has not been granted the requested
logon type at this computer.
1386 0x056A A cross-encrypted password is necessary to change a user
password.
1387 0x056B A new member could not be added to a local group because
the member does not exist.
1388 0x056C A new member could not be added to a local group because
the member has the wrong account type.
1389 0x056D Too many security IDs have been specified.
1390 0x056E A cross-encrypted password is necessary to change this user
password.
1391 0x056F Indicates an ACL contains no inheritable components
1392 0x0570 The file or directory is corrupt and non-readable.
1393 0x0571 The disk structure is corrupt and non-readable.
1394 0x0572 There is no user session key for the specified logon
session.
1395 0x0573 The service being accessed is licensed for a particular
number of connections. No more connections can be made to the service at
this time because there are already as many connections as the service can
accept.
1400 0x0578 Invalid window handle.
1401 0x0579 Invalid menu handle.
1402 0x057A Invalid cursor handle.
1403 0x057B Invalid accelerator table handle.
1404 0x057C Invalid hook handle.
1405 0x057D Invalid handle to a multiple-window position structure.
1406 0x057E Cannot create a top-level child window.
1407 0x057F Cannot find window class.
1408 0x0580 Invalid window, belongs to other thread.
1409 0x0581 Hot key is already registered.
1410 0x0582 Class already exists.
1411 0x0583 Class does not exist.
1412 0x0584 Class still has open windows.
1413 0x0585 Invalid index.
1414 0x0586 Invalid icon handle.
1415 0x0587 Using private DIALOG window words.
1416 0x0588 The listbox identifier was not found.
1417 0x0589 No wildcards were found.
1418 0x058A Thread does not have a clipboard open.
1419 0x058B Hot key is not registered.
1420 0x058C The window is not a valid dialog window.
1421 0x058D Control ID not found.
1422 0x058E Invalid message for a combo box because it does not have an
edit control.
1423 0x058F The window is not a combo box.
1424 0x0590 Height must be less than 256.
1425 0x0591 Invalid device context (DC) handle.
1426 0x0592 Invalid hook procedure type.
1427 0x0593 Invalid hook procedure.
1428 0x0594 Cannot set non-local hook without a module handle.
1429 0x0595 This hook procedure can only be set globally.
1430 0x0596 The journal hook procedure is already installed.
1431 0x0597 The hook procedure is not installed.
1432 0x0598 Invalid message for single-selection listbox.
1433 0x0599 LB_SETCOUNT sent to non-lazy listbox.
1434 0x059A This list box does not support tab stops.
1435 0x059B Cannot destroy object created by another thread.
1436 0x059C Child windows cannot have menus.
1437 0x059D The window does not have a system menu.
1438 0x059E Invalid message box style.
1439 0x059F Invalid system-wide (SPI_*) parameter.
1440 0x05A0 Screen already locked.
1441 0x05A1 All handles to windows in a multiple-window position
structure must have the same parent.
1442 0x05A2 The window is not a child window.
1443 0x05A3 Invalid GW_* command.
1444 0x05A4 Invalid thread identifier.
1445 0x05A5 Cannot process a message from a window that is not a
multiple document interface (MDI) window.
1446 0x05A6 Popup menu already active.
1447 0x05A7 The window does not have scroll bars.
1448 0x05A8 Scroll bar range cannot be greater than 0x7FFF.
1449 0x05A9 Cannot show or remove the window in the way specified.
1450 0x05AA Insufficient system resources exist to complete the
requested service.
1451 0x05AB Insufficient system resources exist to complete the
requested service.
1452 0x05AC Insufficient system resources exist to complete the
requested service.
1453 0x05AD Insufficient quota to complete the requested service.
1454 0x05AE Insufficient quota to complete the requested service.
1455 0x05AF The paging file is too small for this operation to
complete.
1456 0x05B0 A menu item was not found.
1500 0x05DC The event log file is corrupt.
1501 0x05DD No event log file could be opened, so the event logging
service did not start.
1502 0x05DE The event log file is full.
1503 0x05DF The event log file has changed between reads.
1700 0x06A4 The string binding is invalid.
1701 0x06A5 The binding handle is not the correct type.
1702 0x06A6 The binding handle is invalid.
1703 0x06A7 The RPC protocol sequence is not supported.
1704 0x06A8 The RPC protocol sequence is invalid.
1705 0x06A9 The string universal unique identifier (UUID) is invalid.
1706 0x06AA The endpoint format is invalid.
1707 0x06AB The network address is invalid.
1708 0x06AC No endpoint was found.
1709 0x06AD The timeout value is invalid.
1710 0x06AE The object universal unique identifier (UUID) was not
found.
1711 0x06AF The object universal unique identifier (UUID) has already
been registered.
1712 0x06B0 The type univer
This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:54:47 EST