From: Mark Lemon (mlemon_at_hickseq.com)
Date: Fri Oct 01 1999 - 18:35:37 EDT
Here we go again...
TP 600E 2645 with NT4.0. I've installed the 3-Com 10/100 PC card. The
diagnostics are ok, autodetect picks up the correct 10 or 100 port, but the
PC Card in Control Panel has a big red X in it. Driver name elpc575 Driver
status: the driver installed an started but didn't configure the device.
I've tried different base/mem/irq settings, no change no clue. Also noted
that PCMCIA is disabled in devices, but PCCard is not. When I run
Cardwizard, it says "insertion process is currently in process" but doesn't
do anything else.
Any ideas?
Mark
This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:55:26 EST