Re: Thinkpad 760ELD and 4.3Gb not getting along

New Message Reply Date view Thread view Subject view Author view Attachment view

From: Tom Franklin (tdf_at_attglobal.net)
Date: Sat Nov 06 1999 - 01:09:27 EST

I'm not exactly sure. You will have to study the specs. I believe master
is all select pins open. So you will have to cut wires in the cable or cut
pins.

----- Original Message -----
From: Pencetera <pencetera_at_yahoo.com>
To: <thinkpad_at_cs.utk.edu>
Sent: Friday, November 05, 1999 9:15 AM
Subject: Thinkpad 760ELD and 4.3Gb not getting along

> Thank you for the answer, I kind of figured it might
> be something like the cabling. My question now is,
> which pins need to be shorted? Pins 1&2 or 3&4? Keep
> in mind also that the drive itself shows no pins
> designate it as drive 0.
>
> On my cable, pin 1&2 are the right most pins while 3&4
> are right next to them. Pins 5&6 are not used. Can I
> just solder the backside of the connector to short the
> necessary pins?
>
> Thanks in advance,
> Mike B.
>
>
> =====
> http://www.pencetera.com - Your Source For Low Cost, High Quality Fountain
Pens
>
> __________________________________________________
> Do You Yahoo!?
> Bid and sell for free at http://auctions.yahoo.com
>

New Message Reply Date view Thread view Subject view Author view Attachment view

This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:55:33 EST