From: Jimmy E. Chanzi (JChanzi_at_AttGlobal.net)
Date: Fri May 12 2000 - 20:07:49 EDT
Gregory,
It works just fine.
I have the G200 MMS card (G2+ Dual/P) in a Dock III with a 770ED, W98SE and
2 9516 displays...just the usual installation (with the possibility of IRQ
conflicts etc...) The 9516 only accepts 1280 x 1024 res and 60Hz, the 770ED
doesn't accepts it, so when I powered up the computer with everything hooked
up, the displays would not work, I had to connect a regular CRT monitor, let
W98 configure the card then configure the new res. So when I powered up with
the 9516 displays, everything was OK.
Jimmy
P.S: Greg my email to your ibm.net address came back Undeliverable.
-----Original Message-----
From: Gregory Harris [mailto:greg025_at_ibm.net]
Sent: Friday, May 12, 2000 1:18 PM
To: JChanzi_at_AttGlobal.net
Subject: 770ED/G200
Hi Jimmy,
just wondering how the combination is looking. I was just about to buy a
G200/PCI to put in my Dock/III + 770X.
Any comments are appreciated,
Thanks,
This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:56:04 EST