[Thinkpad] Will PowerDVD work well with a 300Mhz Processor?

From: Alan Nelson (Alan-Nelson_at_EagleCS.com)
Date: Fri Nov 29 2002 - 10:43:01 EST

• Next message: Michael Geary: "[Thinkpad] 72 watt A/C Adapters, Cisco wireless"
• Previous message: Bruce Markowitz: "Re: [Thinkpad] A bit lost among TP models and types..."
• Next in thread: Steve C.: "Re: [Thinkpad] Will PowerDVD work well with a 300Mhz Processor?"
• Reply: Steve C.: "Re: [Thinkpad] Will PowerDVD work well with a 300Mhz Processor?"

Hi,

I have a TP 600e, PII 300Mhz, 196MB ram, Windows 98se (model 2645-3AU). I've
read and have been told that PowerDVD is better than DVDExpress at handling
DVD movies. But I've also noticed that PowerDVD requires a minimum 350Mhz
processor.

Where my 600e is 300Mhz, is it still possible to use PowerDVD. And if so,
should I get version 2.55, 3.0 or 4.0. The reason I ask this is, usually the
more recent the software, in general, the more processor and ram the
software uses.

Any help would appriciated.
Thanks,
Al

• Next message: Michael Geary: "[Thinkpad] 72 watt A/C Adapters, Cisco wireless"
• Previous message: Bruce Markowitz: "Re: [Thinkpad] A bit lost among TP models and types..."
• Next in thread: Steve C.: "Re: [Thinkpad] Will PowerDVD work well with a 300Mhz Processor?"
• Reply: Steve C.: "Re: [Thinkpad] Will PowerDVD work well with a 300Mhz Processor?"

This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:59:40 EST