Re: [Thinkpad] TP 600 CPU Upgrade

Interesting. Did this generate the same error code as when you put the
PIII's in? This was a 466 and NOT a 450 right?

J.

----- Original Message -----
From: "James H. E. Maugham" <CaptJHEM@waterw.com>
To: "Jonathan Graham" <grahamj@virtue.cx>; <thinkpad@stderr.org>
Sent: Wednesday, August 06, 2003 3:20 PM
Subject: RE: [Thinkpad] TP 600 CPU Upgrade

> Jonathan Graham wrote:
>
> > By "not work" were they refering to the 100Mhz FSB issue? Or some other
> > quasi-mystical problem? I can tell you that I've put a 600Mhz Celeron
MMC-2
> > module in my wifes 600E and it "worked" as far as any other 100Mhz CPU
works
> > (requires keys on boot). However the 466 Celeron MMC-2 is a 66 Mhz FSB
> > unit in which case it shouldn't be a problem. Unless there is some
issue
> > intrinsic to that model that I haven't heard about.
>
> I installed a 466MHz Celeron in my ancient 600E about 2 - 3 years ago and
had
> the classic "keystroke required" on BOOT.
>
> Regards,
>
> James
>
> _______________________________________________
> Thinkpad mailing list
> Thinkpad@stderr.org
> http://stderr.org/cgi-bin/mailman/listinfo/thinkpad
>

_______________________________________________
Thinkpad mailing list
Thinkpad@stderr.org
http://stderr.org/cgi-bin/mailman/listinfo/thinkpad
Received on Wed Aug 6 15:33:28 2003