no, just screw it in, in place of the existing drive and
it'll be fine..
don't make things more complex than needed.. :-)
*******************
Cordially,
Bill Morrow
(from NetFinity Server)
web page: http://www.thinkpads.com
bill@thinkpads.com
----- Original Message -----
From: "Philip Kiff" <pkiff@sympatico.ca>
To: <thinkpad@stderr.org>
Sent: Thursday, August 14, 2003 1:37 PM
Subject: [Thinkpad] Recommended spacers or padding when
installing 12mm drive inside 17mm 770 series caddy
>
> I am soon going to receive a bare 32GB Travelstar 12mm
height hard drive
> (model: DJSA-232) and intend to install it in a ThinkPad
770Z. The 770
> series caddy was designed for 17mm drives, and I wonder if
there are any
> tricks list members might recommend to keep vibration,
noise, and
> overheating to a minimum when installing a slimmer drive
in the caddy.
>
> In particular, should I stick some kind of material on top
or beneath the
> drive inside the caddy?
>
> Phil.
>
> _______________________________________________
> Thinkpad mailing list
> Thinkpad@stderr.org
> http://stderr.org/cgi-bin/mailman/listinfo/thinkpad
_______________________________________________
Thinkpad mailing list
Thinkpad@stderr.org
http://stderr.org/cgi-bin/mailman/listinfo/thinkpad
Received on Thu Aug 14 21:33:00 2003
This archive was generated by hypermail 2.1.8 : Fri May 26 2006 - 16:01:09 EDT