RE: [Thinkpad] [Selectadock I] Problem with ThinkPad 770x and Windows 98SE

Yes. Here is URL to the IBM tip about using the SelectaDock I
with the ThinkPad 770 family:

http://www-1.ibm.com/support/docview.wss?uid=psg1RJJR-3MXSJ3

Steve

-----Original Message-----
From: thinkpad-admin@stderr.org [mailto:thinkpad-admin@stderr.org]On
Behalf Of Andrew Beals
Sent: Sunday, August 17, 2003 00:58
To: Steven Gorenbergh
Cc: Thinkpad; bandy@cinnamon.com
Subject: Re: [Thinkpad] [Selectadock I] Problem with ThinkPad 770x and
Windows 98SE

Is that a supported configuration? With the Dock III, you need to use its
power supply ... and occasionally unplug it in order to fully reset the
power
logic on 770ED, SelectaBase and the Dock III.

        andy

gorenbergh@mags.net said:
> I am having problems setting up a Selectdock I with a ThinkPad 770x and a
> 770 Selectabase.

> The ThinkPad 770X works fine with the 770 Selectabase.

> The ThinkPad 770x has the latest BIOS applied.

> The Selectadock I is New, Old Stock. It was an IBM sealed box.

> When the Selectadock I is attached to the ThinkPad 770x, the ThinkPad 770x
> will NOT boot.

> I am using a external AC power supply connected the 770 Selectabase. In
this
> configuration the Selectadock I LCD display is NOT illuminated.

> What am I doing wrong?

> TIA, Steve

_______________________________________________
Thinkpad mailing list
Thinkpad@stderr.org
http://stderr.org/cgi-bin/mailman/listinfo/thinkpad
Received on Sun Aug 17 09:42:40 2003