Just in case, let me correct one point.
I checked the sSpec name again. I think Intel's search engine is
something wrong and does not hit SL53S. Therefore my previous
post was somewhat confusing.
My point is, SL53S=SL58S=SL5TF.
These are all P3-1GHz coppermine micro-PGA2 CPU.which
work fine with T20. FYI, SL53S is the one most readily available
on the market among these three, and running in my T20.
Shingo
----- Original Message -----
From: "Shingo Tamaru" <stamaru@andrew.cmu.edu>
To: "'ThinkPad Mail List'" <thinkpad@stderr.org>
Sent: Friday, January 23, 2004 6:37 PM
Subject: Re: [Thinkpad] Upgrade T-20 Thinkpad P-III 2647-81U Laptop CPU
> Hi, Mike.
> Another piece of information, just in case that you have missed it.
>
> As you know, T20s adopt micro-PGA2 package. If you go to
> Intel's processor finder web site,
> http://processorfinder.intel.com/scripts/list.asp?ProcFam=55
> and look for the micro-PGA2 1GHz-P3, you will find that the
> CPU sSpec number is SL5TF.
> However, another one named SL58S also works fine with T20.
> SL58S is described as 495 pin PPGA package, but this is the same
> as micro-PGA2 package. I don't know what it the difference between
> micro-PGA2 and 495 pin PPGA. They just look exactly the same,
> and SL58S is actually working in my T20.
>
> So now you have a little wider CPU selection. I just searched on the
> web and found these pulled ones.
> http://www.affordablecomputers.com/pages/products.php/7614
> http://www.affordablecomputers.com/pages/listings.php/categoryID.CPU
> which costs around $85-$90. On Ebay, the buy-now price is $140+S/H.
> a few auctions are now going on and I don't know the final price for
> them
>
> Hope it helps.
> Shingo
>
>
> ----- Original Message -----
> From: <MScott8169@aol.com>
> To: <thinkpad@stderr.org>
> Cc: <MScott8169@aol.com>
> Sent: Friday, January 23, 2004 9:22 AM
> Subject: [Thinkpad] Upgrade T-20 Thinkpad P-III 2647-81U Laptop CPU
>
>
> > I am new to this site and would like to put some more speed in my three
> and a
> > half year old T-20 IBM laptop. I am sure this is old news here but what
> must
> > one do in order to change the present 700 MHz P-III for a P-III 1.0 GHz
> > micro-pga2 replacement CPU? How is the bus/core ratio changed between
> 6.0x and
> > 10.0x? What system FRU markers must be transferred and how is that
> accomplished?
> >
> >
> > I am running Windows 2000 and plan to update my hard drive to a 20 GB
> unit.
> > I currently have one 250 MB ram chip and though about adding a second
256
> MB
> > chip. What is the best BIOS for supporting these improvements and what
> should
> > be done to assure a successful upgrade?
> >
> > Best regards,
> > Mike Scott
> > _______________________________________________
> > Thinkpad mailing list
> > Thinkpad@stderr.org
> > http://stderr.org/cgi-bin/mailman/listinfo/thinkpad
> >
>
> _______________________________________________
> Thinkpad mailing list
> Thinkpad@stderr.org
> http://stderr.org/cgi-bin/mailman/listinfo/thinkpad
>
_______________________________________________
Thinkpad mailing list
Thinkpad@stderr.org
http://stderr.org/cgi-bin/mailman/listinfo/thinkpad
Received on Sat Jan 24 00:03:39 2004
This archive was generated by hypermail 2.1.8 : Fri May 26 2006 - 16:01:55 EDT