[OmniBook] bios

[rookie99]

I read on your site the following: 
 
++++++++++++++++++++On Thu, 2004-02-19 at 16:28, Wendall Woodbury wrote:
> Two questions?
> QUESTION 1:
> I would like to enter the BIOS of my Omnibook 600C laptop, to make
> some changes. My HP manual says shut down Windows and reboot, then
> when the HP logo appears on the display, press F2 to enter Bios. 
> Well, in my case, no HP logo appears, the computer just reboots to the
> C: prompt.  How can I get into the bios?

Try pressing F2 again and again and again as soon as the laptop begins
to boot.  Someone has probably switched off the HP logo in the BIOS
("quietboot" or something) but F2 should still work, if that's the
correct key.  

Once in the BIOS, check to see whether there are any interesting video
settings... +++++++++++++++++++
 
 
COMMENT: The HP Omnibook 600C doesn't have a BIOS in the traditional
sense. The low level formatting on a 600C is not accesible to the user.
It can be flashed, but it cannot be adjusted. 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://zurich.csail.mit.edu/pipermail/omnibook/attachments/20060607/66d69eed/attachment-0001.html